The (semi) automated garden

Preliminaries

THE KIT

Hose, can, lawn sprinkler, extension hose. TAp!

The controller unit input and outputs:
* blue hose with yellow adaptor: water from the tap.
* Button A: top adaptor - to backgarden lawn.

* Button B: middle adaptor - to backgarden edge.

* Button C: orange adaptor tap - to front garden.

The Job

The black hose with the orange adaptor goes from the controller to the front garden, reaching behind the rose bush nearest to number 3 Pulford Way. It is normally connected to an adaptor to a black pipe that goes from the rose bush to the house front door. 

Task 1 - fill the hedge water bags (with the watering can, for instance).

Task 2- water the front lawn using the sprinkler:

1. Close the tap.
2. At the front, disconnect the black hose with the orange adaptor from the front rosebushes and connect the extension hose to it. 
3. Turn tap wide open.
4. Turn Button C on to water the lawn via the sprinkler.
5. Turn Button C off.
6. Turn tap off.
7. Reconnect the black hose to the adaptor to the rosebushes.
8. Just in case: reconnect the blue hose to the tap.
9. Leave the tap wide open.
10. .
11. .
12. THANK YOU!

Photos that may be used in the future: